CustomProperty
The Application of Very Large, Weld Fabricated, Carburized, Hardened & Hard Finished Advanced Technology Gears in Steel Mill Gear Drives

05FTM19

05FTM19
Authors: Raymond Drago, Roy Cunningham, Steve Cymbala, Drive Systems Technology, Inc.
In the 1980's, Advanced TechnologyGear (ATG) steel rollingmill gear drives consisting of carburized pinions
in mesh with very large, weld fabricated, high through hardened gears were introduced to improve capacity.
Recently, even the improvements obtained from these ATG gear sets were not sufficient to meet higher
production rates and rolling loads. For greater load capacity ATG sets have been developed consisting of
carburized, hardened pinions in mesh with very large, weld fabricated, carburized and hard finished gears.
Single and double helical gears of this type, ranging in size from 80 to 136 inches pitch diameter have been
implemented in several steel rolling applications. This paper describes the conditions that require the use of
these gears and the technology required to design, manufacture, and, especially, heat treat, these very
special, very large gear sets.
Discounted member price: 65.00
85.00
You could save: 23.5%

Similar products

No products found