CustomProperty
Prediction of Surface Zone Changes in Generating Gear Grinding

14FTM02

14FTM02
One possible process for hard finishing gears is generating gear grinding. Due to high process efficiency generating gear grinding has replaced other grinding processes like profile grinding in batch production of small and middle sized gears.
Despite the wide industrial application of generating gear grinding, the process design is based on experience and time and cost intensive trials. The science-based analysis of generating gear grinding needs a high amount of time and effort and only a few published scientific analyses exist. In addition, the transfer of existing knowledge from other grinding processes onto generating gear grinding is complicated due to the contact conditions be-tween tool and gear flank, which change continuously during the grinding process.
One research objective for generating gear grinding is to increase economic efficiency and productivity of the process. At the same time gear quality must be equal or higher and the external zone must not be damaged. But especially the influence of the grinding process on the external zone in generating gear grinding is unknown. In case of an inappropriate process design in combination with stock deviations an unrequested process result or even a thermal damage of the external zone can occur. In this report a thermo-mechanical process model, which describes influences on the surface zone in generating gear grinding, is introduced.
ISBN: 978-1-61481-094-0 Pages: 15
Authors: F. Klocke, M. Brumm, J. Reimann, M. Ophey
Discounted member price: 65.00
85.00
You could save: 23.5%

Similar products

No products found