AGMA Publications


Access the most up-to-date publications applicable to gear manufacturing.  

AGMA members  get a discount on all of our standards documents and other products.  

The results below can be refined by adding search criteria and clicking 'Find'.

PLEASE NOTE:

  1. All documents purchased here will be delivered electronically.
  2. If you are searching for an older standard and do not get a result, it may have been revised or withdrawn. Please refer to the AGMA Publications Catalog by clicking Standards & Technology in the navigation bar.
  3. Permission to request use of AGMA Copyrighted material form.

Complete product listing

Document #Document TitleMember PriceNon Member PriceProduct Category
ANSI/AGMA 1003-H07Tooth Proportions for Fine-Pitch Spur and Helical Gearing 155.00310.00STANDARDS1003_H07
ANSI/AGMA 1006-A97Tooth Proportions for Plastic Gears115.00230.00STANDARDS1006_A97
AGMA ISO 10064-1-A21Code of Inspection Practice - Part 1: Measurement of Cylindrical Gear Tooth Flanks315.00315.00STANDARDS10064_1_A21
AGMA ISO 10064-5-A06Code of Inspection Practice - Part 5: Recommendations Relative to Evaluation of Gear Measuring Instruments 163.00163.00STANDARDS10064_5_A06
AGMA ISO 10064-6-A10Code of Inspection Practice - Part 6: Bevel Gear Measurement Methods134.00134.00STANDARDS10064_6_A10
ANSI/AGMA 1010-F14Appearance of Gear Teeth - Terminology of Wear and Failure195.00390.00STANDARDS1010_F14
ANSI/AGMA 1012-H23Gear Nomenclature, Definition of Terms with Symbols155.00310.00STANDARDS1012-H23
ANSI/AGMA 1102-C19ANSI/AGMA 1102-C19, Tolerance Specification for Gear Hobs125.00250.00STANDARDS1102_C19
ANSI/AGMA 1103-H07Tooth Proportions for Fine-Pitch Spur and Helical Gearing (Metric Edition) 155.00310.00STANDARDS1103_H07
ANSI/AGMA 1104-A09Tolerance Specification for Shaper Cutters 115.00230.00STANDARDS1104_A09
ANSI/AGMA 1106-A97Tolerance Specification for Shaper Cutters (Metric Edition)115.00230.00STANDARDS1106_A97
ANSI/AGMA 1107-A19Tolerance Specification for Form Milling Cutters135.00270.00STANDARDS1107_A19
ANSI/AGMA ISO 1328-1-B14Cylindrical gears - ISO system of flank tolerance classification Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth 111.50223.00STANDARDS1328_1_B14
ANSI/AGMA ISO 1328-2-A21Cylindrical Gears — ISO System of Flank Tolerance Classification — Part 2: Definitions and Allowable Values of Double Flank Radial Composite Deviations83.00166.00STANDARDS1328_2_A21
ANSI/AGMA ISO 14104-A17Gears - Surface Temper Etch Inspection After Grinding, Chemical Method62.00124.00STANDARDS14104_A17
ANSI/AGMA ISO 17485-A08Bevel Gears - ISO System of Accuracy91.50183.00STANDARDS17485_A08
ANSI/AGMA ISO 17485-A08 (Supplemental Tables)Bevel Gears • ISO System of Accuracy • Tolerance Tables 18.0036.00STANDARDS17485_A08_SUPP
ANSI/AGMA ISO 18653-A06Gears - Evaluation of Instruments for the Measurement of Individual Gears83.00166.00STANDARDS18653_A06
AGMA ISO 18792-A19Lubrication of industrial gear drives370.00370.00STANDARDS18792_A19
ANSI/AGMA 2000-A88Gear Classification and Inspection Handbook - Tolerances and Measuring Methods for Unassembled Spur and Helical Gears (Including Metric Equivalents)165.00330.00STANDARDS2000_A88
ANSI/AGMA 2001-D04Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth195.00390.00STANDARDS2001_D04
ANSI/AGMA 2002-D19Tooth Thickness and Backlash Measurement of Cylindrical Involute Gearing190.00380.00STANDARDS2002_D19
ANSI/AGMA 2003-D19Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel and Spiral Bevel Gear Teeth 155.00310.00STANDARDS2003_D19
ANSI/AGMA 2004-C08Gear Materials, Heat Treatment and Processing Manual115.00230.00STANDARDS2004_C08
ANSI/AGMA 2008-D11Assembling Bevel Gears115.00230.00STANDARDS2008_D11
ANSI/AGMA 2011-B14Cylindrical Wormgearing Tolerance and Inspection Methods115.00230.00STANDARDS2011_B14
ANSI/AGMA 2101-D04Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth (Metric Edition)195.00390.00STANDARDS2101_D04
ANSI/AGMA 2111-A98Cylindrical Wormgearing Tolerance and Inspection Methods 115.00230.00STANDARDS2111_A98
ANSI/AGMA 2116-B24Evaluation of Double Flank Testers for Radial Composite Measurement of Gears115.00230.00STANDARDS2116-B24
AGMA ISO 22849-A12Design Recommendations for Bevel Gears165.00165.00STANDARDS22849_A_12
ANSI/AGMA ISO 23509-B17Bevel and Hypoid Gear Geometry139.00278.00STANDARDS23509_B17
ANSI/AGMA 6000-C20Specification for Measurement of Linear Vibration on Gear Units135.00270.00STANDARDS6000_C20
ANSI/AGMA 6001-F19 Design and Selection of Components for Enclosed Gear Drives125.00250.00STANDARDS6001_F19
ANSI/AGMA 6002-D20Design Guide for Vehicle Spur and Helical Gears155.00310.00STANDARDS6002_D20
ANSI/AGMA 6006-B20Standard for Design and Specifications of Gearboxes for Wind Turbines195.00390.00STANDARDS6006_B20
ANSI/AGMA 6008-B24Specifications for Powder Metallurgy Gears135.00270.00STANDARDS6008-B24
ANSI/AGMA 6011-J14Specification for High Speed Helical Gear Units135.00270.00STANDARDS6011_J14
ANSI/AGMA 6013-B16 (Errata included)Standard for Industrial Enclosed Gear Drives155.00310.00STANDARDS6013_B16
ANSI/AGMA 6014-B15Gear Power Rating for Cylindrical Shell and Trunnion Supported Equipment155.00310.00STANDARDS6014_B15
ANSI/AGMA 6015-A13Power Rating of Single and Double Helical Gearing for Rolling Mill Service155.00310.00STANDARDS6015_A13
ANSI/AGMA 6022-D19 (Errata included)Standard for Design Manual for Cylindrical Wormgearing135.00270.00STANDARDS6022_D19
ANSI/AGMA 6025-E19Sound for Enclosed Helical, Herringbone and Spiral Bevel Gear Drives125.00250.00STANDARDS6025_E19
ANSI/AGMA 6032-B13Standard for Marine Gear Units: Rating and Application for Spur and Helical Gear Teeth155.00310.00STANDARDS6032_B13
ANSI/AGMA 6033-C08Materials for Marine Propulsion Gearing135.00270.00STANDARDS6033_C08
ANSI/AGMA 6034-C21Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors155.00310.00STANDARDS6034_C21
ANSI/AGMA 6035-A02Design, Rating and Application of Industrial Globoidal Wormgearing155.00310.00STANDARDS6035_A02
ANSI/AGMA 6101-F19Design and Selection of Components for Enclosed Gear Drives (Metric Edition)125.00250.00STANDARDS6101_F19
ANSI/AGMA 6102-D20Design Guide for Vehicle Spur and Helical Gears(Metric Edition)155.00310.00STANDARDS6102_D20
ANSI/AGMA 6113-B16 (Errata included)Standard for Industrial Enclosed Gear Drives (Metric Edition)155.00310.00STANDARDS6113_B16
ANSI/AGMA 6114-B15Gear Power Rating for Cylindrical Shell and Trunnion Supported Equipment (Metric Edition)155.00310.00STANDARDS6114_B15
ANSI/AGMA 6115-A13Power Rating of Single and Double Helical Gearing for Rolling Mill Service - Metric Edition115.00230.00STANDARDS6115_A13
ANSI/AGMA 6123-C16 (Errata included)Design Manual for Enclosed Epicyclic Gear Drives165.00330.00STANDARDS6123_C16
ANSI/AGMA 6132-B13Standard for Marine Gear Units: Rating and Application for Spur and Helical Gear Teeth (Metric Edition)155.00310.00STANDARDS6132_B13
ANSI/AGMA 6133-C08Materials for Propulsion Gearing (Metric Edition)135.00270.00STANDARDS6133_C08
ANSI/AGMA 6134-C21Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors (Metric Edition)155.00310.00STANDARDS6134_C21
ANSI/AGMA 6135-A02Design, Rating and Application of Industrial Globoidal Wormgearing (Metric Edition)155.00310.00STANDARDS6135_A02
ANSI/AGMA 9000-D11Flexible Couplings - Potential Unbalance Classification135.00270.00STANDARDS9000_D11
ANSI/AGMA 9001-C18Flexible Couplings - Lubrication115.00230.00STANDARDS9001_C18
ANSI/AGMA 9002-C14Bores and Keyways for Flexible Couplings, Inch Series115.00230.00STANDARDS9002_C14
ANSI/AGMA 9003-C17 (Errata included)Flexible Couplings - Keyless Fits115.00230.00STANDARDS9003_C17
ANSI/AGMA 9004-B08Flexible Couplings • Mass Elastic Properties and Other Characteristics115.00230.00STANDARDS9004_B08
ANSI/AGMA 9005-F16Industrial Gear Lubrication115.00230.00STANDARDS9005_F16
ANSI/AGMA 9006-A16Flexible Couplings - Basis for Rating115.00230.00STANDARDS9006_A16
ANSI/AGMA 9008-B00Flexible Couplings • Gear Type • Flange Dimensions, Inch Series115.00230.00STANDARDS9008_B00
ANSI/AGMA 9009-E20Flexible Couplings- Nomenclature for Flexible Couplings115.00230.00STANDARDS9009_E_20
AGMA 901-A92A Rational Procedure for the Preliminary Design of Minimum Volume Gears 65.00130.00STANDARDS901_A92
AGMA 904-C96Metric Usage55.00110.00STANDARDS904_C96
AGMA 905-A17Inspection of Molded Plastic Gears55.00110.00STANDARDS905_A17
AGMA 908-B89Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth65.00130.00STANDARDS908_B89
AGMA 909-A06AGMA 909-A06, Specifications for Molded Plastic Gears 55.00110.00STANDARDS909_A06
AGMA 910-D12AGMA 910-D12 Formats for Fine-Pitch Gear Specification Data65.00130.00STANDARDS910_D12
ANSI/AGMA 9103-C17 (Errata included)Flexible Couplings - Keyless Fits (Metric Edition)115.00230.00STANDARDS9103_C17
ANSI/AGMA 9104-A06Flexible Couplings - Mass Elastic Properties and Other Characteristics ( Metric Edition)115.00230.00STANDARDS9104_A06
AGMA 911-B21Design Guidelines for Aerospace Gear Systems175.00350.00STANDARDS911_B21
ANSI/AGMA 9110-A11Flexible Couplings - Potential Unbalance Classification (Metric Edition)115.00230.00STANDARDS9110_A11
ANSI/AGMA 9112-B15Bores and Keyways for Flexable Couplings, Metric Series.115.00230.00STANDARDS9112_B15
AGMA 913-A98Method for Specifying the Geometry of Spur and Helical Gears65.00130.00STANDARDS913_A98
AGMA 914-B04Gear Sound Manual - Part I: Fundamentals of Sound as Related to Gears; Part II: Sources, Specifications and Levels of Gear Sound; Part III: Gear Noise Control65.00130.00STANDARDS914_B04
AGMA 915-3-A99Inspection Practices - Gear Blanks, Shaft Center Distance and Parallelism55.00110.00STANDARDS915_3_A99
AGMA 916-A19Face Gears with Intersecting Perpendicular Axes105.00210.00STANDARDS916_A19
AGMA 917-B97Design Manual for Parallel Shaft Fine-Pitch Gearing65.00130.00STANDARDS917_B97
AGMA 918-A93A Summary of Numerical Examples Demonstrating the Procedures for Calculating Geometry Factors for Spur and Helical Gears65.00130.00STANDARDS918_A93
AGMA 919-1-A14"Condition Monitoring and Diagnostics of Gear Units and Open Gears: Part 1 - Basics"65.00130.00STANDARDS919_1_A14
AGMA 920-B15Materials for Plastic Gears65.00130.00STANDARDS920_B15
AGMA 922-A96Load Classification & Service Factors for Flexible Coupling75.00150.00STANDARDS922_A96
AGMA 923-C22Metallurgical Specifications for Steel and Cast Iron Gearing175.00350.00STANDARDS923_C22
AGMA 925-B22Effect of Tribology and Lubrication on Gear Surface Distress115.00230.00STANDARDS925_B22
AGMA 926-C99Recommended Practice for Carburized Aerospace Gearing55.00110.00STANDARDS926_C99
AGMA 927-A01Load Distribution Factors - Analytical Methods for Cylindrical Gears65.00130.00STANDARDS927_A01
AGMA 929-B22Calculation of Bevel Gear Top Land, Slot Widths and Cutter Edge Radii155.00310.00STANDARDS929_B22
AGMA 930-A05Calculated Bending Load Capacity of Powder Metallurgy (P/M)65.00130.00STANDARDS930_A05
AGMA 932-A05Rating the Pitting Resistance and Bending Strength of Hypoid Gears.65.00130.00STANDARDS932_A05
AGMA 933-B03Basic Gear Geometry55.00110.00STANDARDS933_B03
AGMA 935-A05Recommendations Relative to the Evaluation of Radial Composite Gear Double Flank Testers55.00110.00STANDARDS935_A05
AGMA 937-A12Aerospace Bevel Gears95.00190.00STANDARDS937_A12
AGMA 938-A05Shot Peening of Gears55.00110.00STANDARDS938_A05
AGMA 939-A07Austempered Ductile Iron for Gears75.00150.00STANDARDS939_A07
AGMA 940-A09Double Helical Epicyclic Gear Units65.00130.00STANDARDS940_A09
AGMA 942-A12Metallurgical Specifications for Powder Metallurgy, PM, Steel Gearing65.00130.00STANDARDS942_A12
AGMA 943-A22Tolerances for Spur and Helical Racks85.00170.00STANDARDS943_A22
AGMA 944-A19Mechanisms of Powder Metal, PM, Gear Failures75.00150.00STANDARDS944_A19
AGMA 945-1-B20Splines - Design and Application75.00150.00STANDARDS945_1_B20
AGMA 945-2-B20Splines - Design and Application (Inch Edition)75.00150.00STANDARDS945_2_B20
AGMA 946-A21Test Methods for Plastic Gears85.00170.00STANDARDS946_A21
AGMA 947-A23Gear Reducers – Thermal Capacity115.00230.00STANDARDS947-A23
AGMA 955-A22Guidance for Industrial Gear Lubrication105.00210.00STANDARDS955_A22
AGMA 915-2-B20Inspection Practices - Part 2: Double Flank Radial Composite Measurements105.00210.00STANDARDSAGMA_915_2_B20