AGMA Publications


Access the most up-to-date publications applicable to gear manufacturing.  

AGMA members  get a discount on all of our standards documents and other products.  

The results below can be refined by adding search criteria and clicking 'Find'.

PLEASE NOTE:

  1. All documents purchased here will be delivered electronically.
  2. If you are searching for an older standard and do not get a result, it may have been revised or withdrawn. Please refer to the AGMA Publications Catalog

Complete product listing

Document #Document TitleMember PriceNon Member PriceProduct Category
ISO/TR 10064-1:2019Code of inspection practice - Part 1: Measurement of cylindrical gear tooth flanks278.00278.00ISO10064_1_2019
ISO/TR 10064-2:1996 (E) Cor 1:2001 Cor 2:2006Cylindrical gears - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash.166.00166.00ISO10064_2_1996
ISO/TR 10064-3:1996 (E) Cor 1:2006Cylindrical gears - Code of inspection practice - Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes 54.0054.00ISO10064_3_1996
ISO/TR 10064-4:1998(E) Cor 1:2006Cylindrical gears — Code of inspection practice - Part 4: Recommendations relative to surface texture and tooth contact pattern checking 166.00166.00ISO10064_4_1998
ISO/TR 10064-5:2005 Cor 1:2006Cylindrical gears - Code of inspection practice - Part 5: Recommendations relative to evaluation of gear measuring instruments278.00278.00ISO10064_5_2005
ISO/TR 10064-6Code of Inspection Practice - Part 6: Bevel Gear Measurement Methods223.00223.00ISO10064_6
ISO 10300-1:2023Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors250.00250.00ISO10300-1-2023
ISO 10300-2:2023Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (macropitting)194.00194.00ISO10300-2-2023
ISO 10300-3:2023Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength223.00223.00ISO10300-3-2023
ISO/TS 10300-20:2021 166.00166.00ISO10300_20_2021
ISO/TR 10300-30:2017Calculation of load capacity of bevel gears - Part 30: ISO rating system for bevel and hypoid gears - Sample calculations278.00278.00ISO10300_30_2017
ISO/TR 10300-32:2021 278.00278.00ISO10300_32_2021
ISO 10825-1:2022 250.00250.00ISO10825_1_2022
ISO/TR 10825-2:2022 223.00223.00ISO10825_2_2022
ISO/TR 10828:2015Worm gears - Worm profiles and gear mesh geometry278.00278.00ISO10828_2015
ISO 1122-1:1998(E/F) Cor 1:1999 Cor 2:2009Vocabulary of gear terms — Part 1: Definitions related to geometry 250.00250.00ISO1122_1_1998
ISO 1122-2:1999(E/F)Vocabulary of gear terms — Part 2: Definitions related to worm gear geometry 166.00166.00ISO1122_2_1999
ISO 1328-1:2013Cylindrical Gears - ISO System of Flank Tolerance Classification - Part 1: Definitions and Allowable Values of Deviations Relevant to Flanks of Gear Teeth223.00223.00ISO1328_1_2013
ISO 1328-2:2020Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information166.00166.00ISO1328_2_ISO
ISO 13691:2001Petroleum and natural gas industries - High-speed special-purpose gear units250.00250.00ISO13691_2001
ISO 14104:2017Gears - Surface Temper Etch Inspection After Grinding, Chemical Method124.00124.00ISO14104_2017
ISO/TR 14179-1:2001Gears - Thermal capacity - Part 1: Rating gear drives with thermal equilibrium at 95 oC sump temperature194.00194.00ISO14179_1_2001
ISO/TR 14179-2:2001Gears - Thermal capacity - Part 2: Thermal load-carrying capacity194.00194.00ISO14179_2_2001
ISO/TS 14521-2020 278.00278.00ISO14521_2020
ISO 14635-1:2000Gears -- FZG test procedures -- Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils116.00116.00ISO14635_1_2000
ISO 14635-2:2004Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils157.00157.00ISO14635_2_2004
ISO 14635-3:2005Gears - FZG test procedures - Part 3: FZG test method A/2, 8/50 for relative scuffing load - carrying capacity and wear characteristics of semifluid gear greases.157.00157.00ISO14635_3_2005
ISO 17485:2006Bevel Gears - ISO system of accuracy194.00194.00ISO17485_2006
ISO 18653:2003Gears - Evaluation of instruments for the measurement of individual gears166.00166.00ISO18653_2003
ISO/TR 18792:2008Lubrication of Industrial Gear Drives250.00250.00ISO18792
ISO 21771:2007Gears - Cylindrical involute gears and gear pairs - Concepts and geometry278.00278.00ISO21771_2007
ISO/TR 22849:2011Design Recommendations for Bevel Gears223.00223.00ISO22849_2011
ISO 23509:2016Bevel and Hypoid Gear Geometry278.00278.00ISO23509_2016
ISO 2490:2007Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module - Nominal dimensions81.0081.00ISO2490_2007
ISO 4468:2020 223.00223.00ISO4468_2020
ISO 53:1998(E)Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile 54.0054.00ISO53_1998
ISO 54:1996(E)Cylindrical gears for general engineering and for heavy engineering - Modules 54.0054.00ISO54_1996
61400-4:2012(E)Wind Turbines - Part 4: Design Requirements for Wind Turbine Gearboxes515.00515.00ISO61400_4_2012_E
ISO 6336-1:2019Calculation of load capacity of spur and helical gears -Part 1: Basic principles, introduction and general influence factors278.00278.00ISO6336_1_2019
ISO 6336-2:2019Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting)223.00223.00ISO6336_2_2019
ISO/TS 6336-20:2022 194.00194.00ISO6336_20_2022
ISO/TS 6336-21:2022 223.00223.00ISO6336_21_2022
ISO/TS 6336-22:2018Calculation of load capacity of spur and helical gears - Part 22: Calculation of micropitting load capacity223.00223.00ISO6336_22_2018
ISO 6336-3:2019Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength250.00250.00ISO6336_3_2019
ISO/TR 6336-30:2017Calculation of load capacity of spur and helical gears - Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5237.00237.00ISO6336_30_2017
ISO/TR 6336-31:2018Calculation of load capacity of spur and helical gears - Part 31: Calculation examples of micropitting load capacity223.00223.00ISO6336_31_2018
ISO/TS 6336-4:2019Calculation of load capacity of spur and helical gears - Part 4: Calculation of tooth flank fracture load capacity194.00194.00ISO6336_4
ISO 6336-5:2016Calculation of load capacity of spur and helical gears - Part 5: Strength and quality of materials223.00223.00ISO6336_5_2016
ISO 6336-6:2019Calculation of load capacity of spur and helical gears — Part 6: Calculation of service life under variable load223.00223.00ISO6336_6_2019
IS0 677-1976 (E)Straight bevel gears for general engineering and heavy engineering - Basic rack 54.0054.00ISO677_1976
IS0 678-1976 (E)Straight bevel gears for general engineering and heavy engineering - Modules and diametral pitches 54.0054.00ISO678_1976
ISO 701:1998(E)International gear notation — Symbols for geometrical data 54.0054.00ISO701_1998
IS0 8579-1 : 2002(E)Acceptance code for gears - Part 1: Determination of airborne sound power levels emitted by gear units 250.00250.00ISO8579_L_2002
ISO 9085:2002Calculation of load capacity of spur and helical gears - Application for industrial gears250.00250.00ISO9085_2002