AGMA Publications


Access the most up-to-date publications applicable to gear manufacturing.  

AGMA members  get a discount on all of our standards documents and other products.  

The results below can be refined by adding search criteria and clicking 'Find'.

PLEASE NOTE:

  1. All documents purchased here will be delivered electronically.
  2. If you are searching for an older standard and do not get a result, it may have been revised or withdrawn. Please refer to the AGMA Publications Catalog

Complete product listing

Document #Document TitleMember PriceNon Member PriceProduct Category
ISO/TR 10064-1:2019Code of inspection practice - Part 1: Measurement of cylindrical gear tooth flanks205.00205.00ISO10064-1-2019
ISO/TR 10064-2:1996 (E) Cor 1:2001 Cor 2:2006Cylindrical gears - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash.120.00120.00ISO10064-2-1996
ISO/TR 10064-3:1996 (E) Cor 1:2006Cylindrical gears - Code of inspection practice - Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes 60.0060.00ISO10064-3-1996
ISO/TR 10064-4:1998(E) Cor 1:2006Cylindrical gears — Code of inspection practice - Part 4: Recommendations relative to surface texture and tooth contact pattern checking 135.00135.00ISO10064-4-1998
ISO/TR 10064-5:2005 Cor 1:2006Cylindrical gears - Code of inspection practice - Part 5: Recommendations relative to evaluation of gear measuring instruments185.00185.00ISO10064-5-2005
ISO/TR 10064-6Code of Inspection Practice - Part 6: Bevel Gear Measurement Methods164.00164.00ISO10064-6
ISO/TR 10300-30:2017Calculation of load capacity of bevel gears - Part 30: ISO rating system for bevel and hypoid gears - Sample calculations225.00225.00ISO10300-30-2017
ISO 10300-1:2014Calculation of load capacity of bevel gears - Part 1: Introduction and general influence factors211.00211.00ISO10300_1_2014
ISO 10300-2:2014Calculation of load capacity of bevel gears - Part 2: Calculation of surface durability (pitting)165.00165.00ISO10300_2_2014
ISO 10300-3 2014Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength189.00189.00ISO10300_3_2014
ISO 10825:1995(E/F)Gears - Wear and damage to gear teeth - Terminology 204.00204.00ISO10825-1995
ISO/TR 10828:2015Worm gears - Worm profiles and gear mesh geometry143.00143.00ISO10828_2015
ISO 1122-1:1998(E/F) Cor 1:1999 Cor 2:2009Vocabulary of gear terms — Part 1: Definitions related to geometry 204.00204.00ISO1122-1-1998
ISO 1122-2:1999(E/F)Vocabulary of gear terms — Part 2: Definitions related to worm gear geometry 120.00120.00ISO1122-2-1999
ISO 1328-2:2020Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information130.00130.00ISO1328-2 ISO
ISO 1328-1:2013Cylindrical Gears - ISO System of Flank Tolerance Classification - Part 1: Definitions and Allowable Values of Deviations Relevant to Flanks of Gear Teeth165.00165.00ISO1328_1_2013
ISO 13691:2001Petroleum and natural gas industries - High-speed special-purpose gear units204.00204.00ISO13691-2001
ISO 14104:2017Gears - Surface Temper Etch Inspection After Grinding, Chemical Method125.00125.00ISO14104_2017
ISO/TR 14179-1:2001Gears - Thermal capacity - Part 1: Rating gear drives with thermal equilibrium at 95 oC sump temperature75.0075.00ISO14179-1-2001
ISO/TR 14179-2:2001Gears - Thermal capacity - Part 2: Thermal load-carrying capacity157.00157.00ISO14179-2-2001
ISO/TS 14521-2020 235.00235.00ISO14521-2020
ISO 14635-1:2000Gears -- FZG test procedures -- Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils112.00112.00ISO14635-1-2000
ISO 14635-2:2004Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils120.00120.00ISO14635-2-2004
ISO 14635-3:2005Gears - FZG test procedures - Part 3: FZG test method A/2, 8/50 for relative scuffing load - carrying capacity and wear characteristics of semifluid gear greases.120.00120.00ISO14635-3-2005
ISO 17485:2006Bevel Gears - ISO system of accuracy145.00145.00ISO17485-2006
ISO 18653:2003Gears - Evaluation of instruments for the measurement of individual gears120.00120.00ISO18653-2003
ISO/TR 18792:2008Lubrication of Industrial Gear Drives192.00192.00ISO18792
ISO 21771:2007Gears - Cylindrical involute gears and gear pairs - Concepts and geometry235.00235.00ISO21771-2007
ISO/TR 22849:2011Design Recommendations for Bevel Gears164.00164.00ISO22849-2011
ISO 23509:2016Bevel and Hypoid Gear Geometry275.00275.00ISO23509-2016
ISO 2490:2007Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module - Nominal dimensions80.0080.00ISO2490-2007
ISO 4468:2020 185.00185.00ISO4468-2020
ISO 53:1998(E)Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile 60.0060.00ISO53-1998
ISO 54:1996(E)Cylindrical gears for general engineering and for heavy engineering - Modules 46.0046.00ISO54-1996
61400-4:2012(E)Wind Turbines - Part 4: Design Requirements for Wind Turbine Gearboxes268.00268.00ISO61400_4_2012_E
ISO 6336-1:2019Calculation of load capacity of spur and helical gears -Part 1: Basic principles, introduction and general influence factors205.00205.00ISO6336-1-2019
ISO 6336-2:2019Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting)165.00165.00ISO6336-2-2019
ISO/TS 6336-20:2017Calculation of load capacity of spur and helical gears - Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) - Flash temperature method.180.00180.00ISO6336-20-2017
ISO/TS 6336-21:2017Calculation of load capacity of spur and helical gears - Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) - Integral temperature method180.00180.00ISO6336-21-2017
ISO/TS 6336-22:2018Calculation of load capacity of spur and helical gears - Part 22: Calculation of micropitting load capacity180.00180.00ISO6336-22-2018
ISO 6336-3:2019Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength185.00185.00ISO6336-3-2019
ISO/TR 6336-30:2017Calculation of load capacity of spur and helical gears - Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5200.00200.00ISO6336-30-2017
ISO/TR 6336-31:2018Calculation of load capacity of spur and helical gears - Part 31: Calculation examples of micropitting load capacity180.00180.00ISO6336-31-2018
ISO/TS 6336-4:2019Calculation of load capacity of spur and helical gears - Part 4: Calculation of tooth flank fracture load capacity130.00130.00ISO6336-4
ISO 6336-6:2019Calculation of load capacity of spur and helical gears — Part 6: Calculation of service life under variable load165.00165.00ISO6336-6-2019
ISO 6336-5 2016Calculation of load capacity of spur and helical gears - Part 5: Strength and quality of materials175.00175.00ISO6336_5_2016
IS0 677-1976 (E)Straight bevel gears for general engineering and heavy engineering - Basic rack 46.0046.00ISO677-1976
IS0 678-1976 (E)Straight bevel gears for general engineering and heavy engineering - Modules and diametral pitches 46.0046.00ISO678-1976
ISO 701:1998(E)International gear notation — Symbols for geometrical data 53.0053.00ISO701-1998
IS0 8579-1 : 2002(E)Acceptance code for gears - Part 1: Determination of airborne sound power levels emitted by gear units 192.00192.00ISO8579-L-2002
ISO 9083:2001Calculation of load capacity of spur and helical gears - Application to marine gears192.00192.00ISO9083-2001
ISO 9085:2002Calculation of load capacity of spur and helical gears - Application for industrial gears192.00192.00ISO9085-2002