AGMA Publications


Access the most up-to-date publications applicable to gear manufacturing.  

AGMA members  get a discount on all of our standards documents and other products.  

The results below can be refined by adding search criteria and clicking 'Find'.

PLEASE NOTE:

  1. All documents purchased here will be delivered electronically.
  2. If you are searching for an older standard and do not get a result, it may have been revised or withdrawn. Please refer to the AGMA Publications Catalog
  3. Permission to request use of AGMA Copyrighted material form.

Complete product listing

Document #Document TitleMember PriceNon Member PriceProduct Category
ANSI/AGMA 1003-H07 (reaffirmed February 6, 2020)Tooth Proportions for Fine-Pitch Spur and Helical Gearing 40.0080.00STANDARDS1003-H07
ANSI/AGMA 1006-A97 (reaffirmed August 29, 2016)Tooth Proportions for Plastic Gears36.0072.00STANDARDS1006-A97
AGMA ISO 10064-1-A21Code of Inspection Practice - Part 1: Measurement of Cylindrical Gear Tooth Flanks0.00315.00STANDARDS10064-1-A21
AGMA ISO 10064-5-A06Code of Inspection Practice - Part 5: Recommendations Relative to Evaluation of Gear Measuring Instruments 81.50163.00STANDARDS10064-5-A06
AGMA ISO 10064-6-A10Code of Inspection Practice - Part 6: Bevel Gear Measurement Methods67.00134.00STANDARDS10064-6-A10
ANSI/AGMA 1010-F14 (reaffirmed February 6, 2020)Appearance of Gear Teeth - Terminology of Wear and Failure97.50195.00STANDARDS1010-F14
ANSI/AGMA 1012-G05 (reaffirmed March 2011)Gear Nomenclature, Definitions of Terms with Symbols46.0092.00STANDARDS1012-G05
ANSI/AGMA 1102-C19ANSI/AGMA 1102-C19, Tolerance Specification for Gear Hobs55.00110.00STANDARDS1102-C19
ANSI/AGMA 1103-H07 (reaffirmed February 6, 2020)Tooth Proportions for Fine-Pitch Spur and Helical Gearing (Metric Edition) 36.0072.00STANDARDS1103-H07
ANSI/AGMA 1104-A09 (reaffirmed November 2020)Tolerance Specification for Shaper Cutters 43.5087.00STANDARDS1104-A09
ANSI/AGMA 1106-A97 (reaffirmed August 29, 2016)Tooth Proportions for Plastic Gears33.0066.00STANDARDS1106-A97
ANSI/AGMA 1107-A19Tolerance Specification for Form Milling Cutters45.0090.00STANDARDS1107-A19
ANSI/AGMA ISO 1328-1-B14Cylindrical gears - ISO system of flank tolerance classification Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth 77.50155.00STANDARDS1328-1-B14
ANSI/AGMA ISO 14104-A17Gears - Surface Temper Etch Inspection After Grinding, Chemical Method55.00110.00STANDARDS14104-A17
AGMA ISO 14179-1Gear Reducers - Thermal Capacity Based on ISO/TR 14179-136.5073.00STANDARDS14179-1
ANSI/AGMA ISO 17485-A08 (reaffirmed March 2014)Bevel Gears - ISO System of Accuracy61.50123.00STANDARDS17485-A08
ANSI/AGMA ISO 17485-A08 (SUPP)Bevel Gears • ISO System of Accuracy • Tolerance Tables 18.0036.00STANDARDS17485-A08 SUPP
ANSI/AGMA ISO 18653-A06Gears - Evaluation of Instruments for the Measurement of Individual Gears41.5083.00STANDARDS18653-A06
AGMA ISO 18792-A19Lubrication of industrial gear drives185.00370.00STANDARDS18792-A19
ANSI/AGMA 2000-A88 (Note: standard was withdrawn & replaced)Gear Classification and Inspection Handbook - Tolerances and Measuring Methods for Unassembled Spur and Helical Gears (Including Metric Equivalents)66.50133.00STANDARDS2000-A88
ANSI/AGMA 2001-D04 (reaffirmed March 2016)Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth92.50185.00STANDARDS2001-D04
ANSI/AGMA 2002-D19Tooth Thickness and Backlash Measurement of Cylindrical Involute Gearing85.00170.00STANDARDS2002-D19
ANSI/AGMA 2003-D19Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel and Spiral Bevel Gear Teeth 95.00190.00STANDARDS2003-D19
ANSI/AGMA 2004-C08 (reaffirmed February 6, 2020)Gear Materials, Heat Treatment and Processing Manual57.00114.00STANDARDS2004-C08
ANSI/AGMA 2008-D11 (reaffirmed December 27, 2016)Assembling Bevel Gears38.0076.00STANDARDS2008-D11
ANSI/AGMA 2011-B14 (reaffirmed December 17, 2019)Cylindrical Wormgearing Tolerance and Inspection Methods49.0098.00STANDARDS2011-B14
ANSI/AGMA 2015-2-B15 (Reaffirmed November 2020)Gear Tooth Flank Tolerance Classification System - Definitions and Allowable Values of Double Flank Radial Composite Deviations34.0068.00STANDARDS2015-2-B15
ANSI/AGMA 2101-D04 (reaffirmed March 2016)Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth (Metric Edition)70.50141.00STANDARDS2101-D04
ANSI/AGMA 2111-A98 (reaffirmed November 2020)Cylindrical Wormgearing Tolerance and Inspection Methods 37.0074.00STANDARDS2111-A98
ANSI/AGMA 2116-A05 (reaffirmed February 2, 2017)Evaluation of Double Flank Testers for Radial Composite Measurement of Gears20.0040.00STANDARDS2116-A05
AGMA ISO 22849-A-12Design Recommendations for Bevel Gears82.50165.00STANDARDS22849-A-12
ANSI/AGMA ISO 23509-B17Bevel and Hypoid Gear Geometry120.00240.00STANDARDS23509-B17
ANSI/AGMA 6000-C20Specification for Measurement of Linear Vibration on Gear Units0.00130.00STANDARDS6000-C20
ANSI AGMA 6001-F19 Design and Selection of Components for Enclosed Gear Drives70.00140.00STANDARDS6001-F19
ANSI/AGMA 6002-D20 ( Revision of ANSI/AGMA 6002-C15)Design Guide for Vehicle Spur and Helical Gears45.0090.00STANDARDS6002-D20
ANSI/AGMA 6006-B20Standard for Design and Specifications of Gearboxes for Wind Turbines195.00390.00STANDARDS6006-B20
ANSI/AGMA 6008-A98 (reaffirmed December 14, 2017)Specifications for Powder Metallurgy Gears30.0060.00STANDARDS6008-A98
ANSI/AGMA 6011-J14 (reaffirmed December 19, 2019)Specification for High Speed Helical Gear Units61.00122.00STANDARDS6011-J14
ANSI/AGMA 6013-B16Standard for Industrial Enclosed Gear Drives99.00198.00STANDARDS6013-B16
ANSI/AGMA 6014-B15 (Reaffirmed December 4, 2020)Gear Power Rating for Cylindrical Shell and Trunnion Supported Equipment78.00156.00STANDARDS6014-B15
ANSI/AGMA 6015-A13 (reaffirmed December 17, 2018)Power Rating of Single and Double Helical Gearing for Rolling Mill Service64.50129.00STANDARDS6015-A13
ANSI/AGMA 6022-D19 (with Errata)Standard for Design Manual for Cylindrical Wormgearing44.0088.00STANDARDS6022-D19
ANSI AGMA 6025-E19Sound for Enclosed Helical, Herringbone and Spiral Bevel Gear Drives65.00130.00STANDARDS6025-E19
ANSI/AGMA 6032-B13 (reaffirmed December 14, 2018)Standard for Marine Gear Units: Rating and Application for Spur and Helical Gear Teeth53.00106.00STANDARDS6032-B13
ANSI/AGMA 6033-C08 (reaffirmed February 7, 2020)Materials for Marine Propulsion Gearing48.0096.00STANDARDS6033-C08
ANSI/AGMA 6034-C21Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors0.00150.00STANDARDS6034-C21
ANSI/AGMA 6035-A02 (Reaffirmed May 2019)Design, Rating and Application of Industrial Globoidal Wormgearing41.5083.00STANDARDS6035-A02
ANSI AGMA 6101-F19Design and Selection of Components for Enclosed Gear Drives (Metric Edition)70.00140.00STANDARDS6101-F19
ANSI/AGMA 6102-D20 (Metric Edition of ANSI/AGMA 6002-D20)Design Guide for Vehicle Spur and Helical Gears(Metric Edition)45.0090.00STANDARDS6102-D20
ANSI/AGMA 6113-B16Standard for Industrial Enclosed Gear Drives (Metric Edition)89.00178.00STANDARDS6113-B16
ANSI/AGMA 6114-B15 (Reaffirmed December 4, 2020)Gear Power Rating for Cylindrical Shell and Trunnion Supported Equipment (Metric Edition)62.50125.00STANDARDS6114-B15
ANSI/AGMA 6115-A13 (reaffirmed December 14, 2018)Power Rating of Single and Double Helical Gearing for Rolling Mill Service - Metric Edition55.50111.00STANDARDS6115-A13
ANSI/AGMA 6123-C16 (with Errata)Design Manual for Enclosed Epicyclic Gear Drives88.00176.00STANDARDS6123-C16
ANSI/AGMA 6132-B13 (reaffirmed December 14, 2018)Standard for Marine Gear Units: Rating and Application for Spur and Helical Gear Teeth (Metric Edition)50.50101.00STANDARDS6132-B13
ANSI/AGMA 6133-C08 (reaffirmed February 7, 2020)Materials for Propulsion Gearing (Metric Edition)41.5083.00STANDARDS6133-C08
ANSI/AGMA 6134-C21Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors (Metric Edition)0.00150.00STANDARDS6134-C21
ANSI/AGMA 6135-A02 (Reaffirmed May 2019)Design, Rating and Application of Industrial Globoidal Wormgearing (Metric Edition)39.0078.00STANDARDS6135-A02
ANSI/AGMA ISO 6336-6-A08 (reaffirmed March 2014)Calculation of Load Capacity of Spur and Helical Gears - Part 6: Calculation of Service Life Under Variable Load55.50111.00STANDARDS6336-6-A08
ANSI/AGMA 9000-D11 (Reaffirmed December 8, 2016)Flexible Couplings - Potential Unbalance Classification39.5079.00STANDARDS9000-D11
ANSI/AGMA 9001-C18Flexible Couplings - Lubrication24.0048.00STANDARDS9001-C18
ANSI/AGMA 9002-C14 (Reaffirmed June 2020)Bores and Keyways for Flexible Couplings, Inch Series34.0068.00STANDARDS9002-C14
ANSI/AGMA 9003-C17Flexible Couplings - Keyless Fits38.0076.00STANDARDS9003-C17
ANSI/AGMA 9004-B08 (reaffirmed April 2020)Flexible Couplings • Mass Elastic Properties and Other Characteristics36.5073.00STANDARDS9004-B08
ANSI/AGMA 9005-F16Industrial Gear Lubrication56.00112.00STANDARDS9005-F16
ANSI/AGMA 9006-A16Flexible Couplings - Basis for Rating34.0068.00STANDARDS9006-A16
ANSI/AGMA 9008-B00 (reaffirmed December 19, 2017)Flexible Couplings • Gear Type • Flange Dimensions, Inch Series21.0042.00STANDARDS9008-B00
ANSI/AGMA 9009-E20 (Revision of ANSI/AGMA 9009-D02)Flexible Couplings- Nomenclature for Flexible Couplings40.0080.00STANDARDS9009-E-20
AGMA 901-A92 (Reaffirmed April 2020)A Rational Procedure for the Preliminary Design of Minimum Volume Gears 18.0036.00STANDARDS901-A92
AGMA 904-C96 (reaffirmed January 2017)Metric Usage22.0044.00STANDARDS904-C96
AGMA 905-A17, Inspection of Molded Plastic GearsInspection of Molded Plastic Gears42.0084.00STANDARDS905-A17
AGMA 908-B89 (reaffirmed November 11, 2020)AGMA 908-89, Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth47.0094.00STANDARDS908-B89
AGMA 909-A06 (reaffirmed April 10, 2018)AGMA 909-A06, Specifications for Molded Plastic Gears 27.5055.00STANDARDS909-A06
AGMA 910-D12 (reaffirmed September 6, 2017)AGMA 910-D12 Formats for Fine-Pitch Gear Specification Data29.5059.00STANDARDS910-D12
ANSI/AGMA 9103-C17Flexible Couplings - Keyless Fits (Metric Edition)35.0070.00STANDARDS9103-C17
ANSI/AGMA 9104-A06 (reaffirmed December 19, 2017)Flexible Couplings - Mass Elastic Properties and Other Characteristics ( Metric Edition)33.5067.00STANDARDS9104-A06
AGMA 911-B21Design Guidelines for Aerospace Gear Systems0.00275.00STANDARDS911-B21
ANSI/AGMA 9110-A11 (Reaffirmed December 8, 2016)Flexible Couplings - Potential Unbalance Classification (Metric Edition)36.5073.00STANDARDS9110-A11
ANSI/AGMA 9112-B15 (Reaffirmed December 7, 2020)Bores and Keyways for Flexable Couplings, Metric Series.31.0062.00STANDARDS9112-B15
AGMA 913-A98 (Reaffirmed May 2021)Method for Specifying the Geometry of Spur and Helical Gears31.0062.00STANDARDS913-A98
AGMA 914-B04 (reaffirmed March 15, 2018)Gear Sound Manual - Part I: Fundamentals of Sound as Related to Gears; Part II: Sources, Specifications and Levels of Gear Sound; Part III: Gear Noise Control40.0080.00STANDARDS914-B04
AGMA 915-3-A99 (reaffirmed September 21, 2017)Inspection Practices - Gear Blanks, Shaft Center Distance and Parallelism17.0034.00STANDARDS915-3-A99
AGMA 916-A19Face Gears with Intersecting Perpendicular Axes95.00190.00STANDARDS916-A19
AGMA 917-B97 (reaffirmed September 6, 2017)Design Manual for Parallel Shaft Fine-Pitch Gearing45.0090.00STANDARDS917-B97
AGMA 918-A93 (Reaffirmed November 11, 2020)A Summary of Numerical Examples Demonstrating the Procedures for Calculating Geometry Factors for Spur and Helical Gears36.0072.00STANDARDS918-A93
AGMA 919-1-A14 (reaffirmed March 25, 2019)"Condition Monitoring and Diagnostics of Gear Units and Open Gears: Part 1 - Basics"27.5055.00STANDARDS919-1-A14
AGMA 920-B15 (Reaffirmed June 2020)Materials for Plastic Gears31.0062.00STANDARDS920-B15
AGMA 922-A96 (Reaffirmed April 2020)Load Classification & Service Factors for Flexible Coupling21.0042.00STANDARDS922-A96
AGMA 923-B05 (reaffirmed April 8, 2010)Metallurgical Specifications for Steel Gearing 41.5083.00STANDARDS923-B05
AGMA 925-A03 (reaffirmed January 2013)Effect of Lubrication on Gear Surface Distress38.0076.00STANDARDS925-A03
AGMA 926-C99 (reaffirmed November 29, 2017)Recommended Practice for Carburized Aerospace Gearing27.0054.00STANDARDS926-C99
AGMA 927-A01 (reaffirmed January 30, 2018)Load Distribution Factors - Analytical Methods for Cylindrical Gears35.5071.00STANDARDS927-A01
AGMA 929-A06 (reaffirmed February 3, 2011)Calculation of Bevel Gear Top Land and Guidance on Cutter Edge Radius40.5081.00STANDARDS929-A06
AGMA 930-A05 (reaffirmed November 29, 2017)Calculated Bending Load Capacity of Powder Metallurgy (P/M)47.0094.00STANDARDS930-A05
AGMA 932-A05 (reaffirmed February 3, 2011)Rating the Pitting Resistance and Bending Strength of Hypoid Gears.33.5067.00STANDARDS932-A05
AGMA 933-B03 (reaffirmed October 3, 2017)Basic Gear Geometry19.5039.00STANDARDS933-B03
AGMA 935-A05 (Reaffirmed April 2020)Recommendations Relative to the Evaluation of Radial Composite Gear Double Flank Testers22.0044.00STANDARDS935-A05
AGMA 937-A12 (reaffirmed November 29, 2017)Aerospace Bevel Gears54.50109.00STANDARDS937-A12
AGMA 938-A05 (reaffirmed September 19, 2017)Shot Peening of Gears25.0050.00STANDARDS938-A05
AGMA 939-A07 (reaffirmed January 30, 2018)Austempered Ductile Iron for Gears31.0062.00STANDARDS939-A07
AGMA 940-A09 (reaffirmed November 29, 2017)Double Helical Epicyclic Gear Units34.0068.00STANDARDS940-A09
AGMA 942-A12 (Reaffirmed May 25, 2017)Metallurgical Specifications for Powder Metallurgy, PM, Steel Gearing38.5077.00STANDARDS942-A12
AGMA 944-A19Mechanisms of Powder Metal, PM, Gear Failures65.00130.00STANDARDS944-A19
AGMA 945-1-B20Splines - Design and Application65.00130.00STANDARDS945-1-B20
AGMA 945-2-B20Splines - Design and Application (Inch Edition)65.00130.00STANDARDS945-2-B20
AGMA 946-A21Test Methods for Plastic Gears0.00140.00STANDARDS946-A21
AGMA 915-2-B20Inspection Practices - Part 2: Double Flank Radial Composite Measurements85.00170.00STANDARDSAGMA 915-2-B20