AGMA Publications

Access the most up-to-date publications applicable to gear manufacturing.  

AGMA members  get a discount on all of our standards documents and other products.  

The results below can be refined by adding search criteria and clicking 'Find'.


  1. All documents purchased here will be delivered electronically.
  2. If you are searching for an older standard and do not get a result, it may have been revised or withdrawn. Please refer to the AGMA Publications Catalog
  3. Permission to request use of AGMA Copyrighted material form.

Complete product listing

Document #Document TitleMember PriceNon Member PriceProduct Category
ANSI/AGMA 1003-H07 (reaffirmed February 6, 2020)Tooth Proportions for Fine-Pitch Spur and Helical Gearing 40.0080.00STANDARDS1003-H07
ANSI/AGMA 1006-A97 (reaffirmed August 29, 2016)Tooth Proportions for Plastic Gears36.0072.00STANDARDS1006-A97
AGMA ISO 10064-1-A21Code of Inspection Practice - Part 1: Measurement of Cylindrical Gear Tooth Flanks235.00315.00STANDARDS10064-1-A21
AGMA ISO 10064-5-A06Code of Inspection Practice - Part 5: Recommendations Relative to Evaluation of Gear Measuring Instruments 81.50163.00STANDARDS10064-5-A06
AGMA ISO 10064-6-A10Code of Inspection Practice - Part 6: Bevel Gear Measurement Methods67.00134.00STANDARDS10064-6-A10
ANSI/AGMA 1010-F14 (reaffirmed February 6, 2020)Appearance of Gear Teeth - Terminology of Wear and Failure97.50195.00STANDARDS1010-F14
ANSI/AGMA 1012-G05 (reaffirmed March 2011)Gear Nomenclature, Definitions of Terms with Symbols46.0092.00STANDARDS1012-G05
ANSI/AGMA 1102-C19Tolerance Specification for Gear Hobs55.00110.00STANDARDS1102-C19
ANSI/AGMA 1103-H07 (reaffirmed February 6, 2020)Tooth Proportions for Fine-Pitch Spur and Helical Gearing (Metric Edition) 36.0072.00STANDARDS1103-H07
ANSI/AGMA 1104-A09 (reaffirmed November 2020)Tolerance Specification for Shaper Cutters 43.5087.00STANDARDS1104-A09
ANSI/AGMA 1106-A97 (reaffirmed August 29, 2016)Tooth Proportions for Plastic Gears33.0066.00STANDARDS1106-A97
ANSI/AGMA 1107-A19Tolerance Specification for Form Milling Cutters45.0090.00STANDARDS1107-A19
ANSI/AGMA ISO 1328-1-B14Cylindrical gears - ISO system of flank tolerance classification Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth 77.50155.00STANDARDS1328-1-B14
ANSI/AGMA ISO 1328-2-A21Cylindrical Gears — ISO System of Flank Tolerance Classification — Part 2: Definitions and Allowable Values of Double Flank Radial Composite Deviations70.00140.00STANDARDS1328-2-A21
ANSI/AGMA ISO 14104-A17Gears - Surface Temper Etch Inspection After Grinding, Chemical Method55.00110.00STANDARDS14104-A17
AGMA ISO 14179-1Gear Reducers - Thermal Capacity Based on ISO/TR 14179-136.5073.00STANDARDS14179-1
ANSI/AGMA ISO 17485-A08 (reaffirmed March 2014)Bevel Gears - ISO System of Accuracy61.50123.00STANDARDS17485-A08
ANSI/AGMA ISO 17485-A08 (SUPP)Bevel Gears • ISO System of Accuracy • Tolerance Tables 18.0036.00STANDARDS17485-A08 SUPP
ANSI/AGMA ISO 18653-A06Gears - Evaluation of Instruments for the Measurement of Individual Gears41.5083.00STANDARDS18653-A06
AGMA ISO 18792-A19Lubrication of industrial gear drives185.00370.00STANDARDS18792-A19
ANSI/AGMA 2000-A88 (Note: standard was withdrawn & replaced)Gear Classification and Inspection Handbook - Tolerances and Measuring Methods for Unassembled Spur and Helical Gears (Including Metric Equivalents)66.50133.00STANDARDS2000-A88
ANSI/AGMA 2001-D04 (reaffirmed March 2016)Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth92.50185.00STANDARDS2001-D04
ANSI/AGMA 2002-D19Tooth Thickness and Backlash Measurement of Cylindrical Involute Gearing85.00170.00STANDARDS2002-D19
ANSI/AGMA 2003-D19Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel and Spiral Bevel Gear Teeth 95.00190.00STANDARDS2003-D19
ANSI/AGMA 2004-C08 (reaffirmed February 6, 2020)Gear Materials, Heat Treatment and Processing Manual57.00114.00STANDARDS2004-C08
ANSI/AGMA 2008-D11 (reaffirmed November 2021)Assembling Bevel Gears38.0076.00STANDARDS2008-D11
ANSI/AGMA 2011-B14 (reaffirmed December 17, 2019)Cylindrical Wormgearing Tolerance and Inspection Methods49.0098.00STANDARDS2011-B14
ANSI/AGMA 2015-2-B15 (Reaffirmed November 2020)Gear Tooth Flank Tolerance Classification System – Definitions and Allowable Values of Double Flank Radial Composite Deviations34.0068.00STANDARDS2015-2-B15
ANSI/AGMA 2101-D04 (reaffirmed March 2016)Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth (Metric Edition)70.50141.00STANDARDS2101-D04
ANSI/AGMA 2111-A98 (reaffirmed November 2020)Cylindrical Wormgearing Tolerance and Inspection Methods (Metric Edition)37.0074.00STANDARDS2111-A98
ANSI/AGMA 2116-A05 (reaffirmed February 2, 2017)Evaluation of Double Flank Testers for Radial Composite Measurement of Gears20.0040.00STANDARDS2116-A05
AGMA ISO 22849-A-12Design Recommendations for Bevel Gears82.50165.00STANDARDS22849-A-12
ANSI/AGMA ISO 23509-B17Bevel and Hypoid Gear Geometry120.00240.00STANDARDS23509-B17
ANSI/AGMA 6000-C20Specification for Measurement of Linear Vibration on Gear Units0.00130.00STANDARDS6000-C20
ANSI AGMA 6001-F19 Design and Selection of Components for Enclosed Gear Drives70.00140.00STANDARDS6001-F19
ANSI/AGMA 6002-D20 ( Revision of ANSI/AGMA 6002-C15)Design Guide for Vehicle Spur and Helical Gears45.0090.00STANDARDS6002-D20
ANSI/AGMA 6006-B20Standard for Design and Specifications of Gearboxes for Wind Turbines195.00390.00STANDARDS6006-B20
ANSI/AGMA 6008-A98 (reaffirmed December 14, 2017)Specifications for Powder Metallurgy Gears30.0060.00STANDARDS6008-A98
ANSI/AGMA 6011-J14 (reaffirmed December 19, 2019)Specification for High Speed Helical Gear Units61.00122.00STANDARDS6011-J14
ANSI/AGMA 6013-B16 (with Errata - Reaffirmed November 2021)Standard for Industrial Enclosed Gear Drives99.00198.00STANDARDS6013-B16
ANSI/AGMA 6014-B15 (Reaffirmed December 4, 2020)Gear Power Rating for Cylindrical Shell and Trunnion Supported Equipment78.00156.00STANDARDS6014-B15
ANSI/AGMA 6015-A13 (reaffirmed December 17, 2018)Power Rating of Single and Double Helical Gearing for Rolling Mill Service64.50129.00STANDARDS6015-A13
ANSI/AGMA 6022-D19 (with Errata)Standard for Design Manual for Cylindrical Wormgearing44.0088.00STANDARDS6022-D19
ANSI AGMA 6025-E19Sound for Enclosed Helical, Herringbone and Spiral Bevel Gear Drives65.00130.00STANDARDS6025-E19
ANSI/AGMA 6032-B13 (reaffirmed December 14, 2018)Standard for Marine Gear Units: Rating and Application for Spur and Helical Gear Teeth53.00106.00STANDARDS6032-B13
ANSI/AGMA 6033-C08 (reaffirmed February 7, 2020)Materials for Marine Propulsion Gearing48.0096.00STANDARDS6033-C08
ANSI/AGMA 6034-C21Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors75.00150.00STANDARDS6034-C21
ANSI/AGMA 6035-A02 (Reaffirmed May 2019)Design, Rating and Application of Industrial Globoidal Wormgearing41.5083.00STANDARDS6035-A02
ANSI AGMA 6101-F19Design and Selection of Components for Enclosed Gear Drives (Metric Edition)70.00140.00STANDARDS6101-F19
ANSI/AGMA 6102-D20 (Metric Edition of ANSI/AGMA 6002-D20)Design Guide for Vehicle Spur and Helical Gears(Metric Edition)45.0090.00STANDARDS6102-D20
ANSI/AGMA 6113-B16 (with Errata - Reaffirmed November 2021)Standard for Industrial Enclosed Gear Drives (Metric Edition)89.00178.00STANDARDS6113-B16
ANSI/AGMA 6114-B15 (Reaffirmed December 4, 2020)Gear Power Rating for Cylindrical Shell and Trunnion Supported Equipment (Metric Edition)62.50125.00STANDARDS6114-B15
ANSI/AGMA 6115-A13 (reaffirmed December 14, 2018)Power Rating of Single and Double Helical Gearing for Rolling Mill Service - Metric Edition55.50111.00STANDARDS6115-A13
ANSI/AGMA 6123-C16 (with Errata) (Reaffirmed October 2021)Design Manual for Enclosed Epicyclic Gear Drives88.00176.00STANDARDS6123-C16
ANSI/AGMA 6132-B13 (reaffirmed December 14, 2018)Standard for Marine Gear Units: Rating and Application for Spur and Helical Gear Teeth (Metric Edition)50.50101.00STANDARDS6132-B13
ANSI/AGMA 6133-C08 (reaffirmed February 7, 2020)Materials for Propulsion Gearing (Metric Edition)41.5083.00STANDARDS6133-C08
ANSI/AGMA 6134-C21Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors (Metric Edition)75.00150.00STANDARDS6134-C21
ANSI/AGMA 6135-A02 (Reaffirmed May 2019)Design, Rating and Application of Industrial Globoidal Wormgearing (Metric Edition)39.0078.00STANDARDS6135-A02
ANSI/AGMA 9000-D11 (Reaffirmed January 2022)Flexible Couplings - Potential Unbalance Classification39.5079.00STANDARDS9000-D11
ANSI/AGMA 9001-C18Flexible Couplings - Lubrication24.0048.00STANDARDS9001-C18
ANSI/AGMA 9002-C14 (Reaffirmed June 2020)Bores and Keyways for Flexible Couplings (Inch Series)34.0068.00STANDARDS9002-C14
ANSI/AGMA 9003-C17 (with Errata) (Reaffirmed August 2022)Flexible Couplings – Keyless Fits38.0076.00STANDARDS9003-C17
ANSI/AGMA 9004-B08 (reaffirmed April 2020)Flexible Couplings - Mass Elastic Properties and Other Characteristics36.5073.00STANDARDS9004-B08
ANSI/AGMA 9005-F16 (Reaffirmed October 2021)Industrial Gear Lubrication56.00112.00STANDARDS9005-F16
ANSI/AGMA 9006-A16 (Reaffirmed January 2022)Flexible Couplings - Basis for Rating34.0068.00STANDARDS9006-A16
ANSI/AGMA 9008-B00Flexible Couplings - Gear Type - Flange Dimensions, Inch Series21.0042.00STANDARDS9008-B00
ANSI/AGMA 9009-E20 (Revision of ANSI/AGMA 9009-D02)Flexible Couplings- Nomenclature for Flexible Couplings40.0080.00STANDARDS9009-E-20
AGMA 901-A92 (Reaffirmed April 2020)A Rational Procedure for the Preliminary Design of Minimum Volume Gears 18.0036.00STANDARDS901-A92
AGMA 904-C96 (reaffirmed January 2017)Metric Usage22.0044.00STANDARDS904-C96
AGMA 905-A17, Inspection of Molded Plastic GearsInspection of Molded Plastic Gears42.0084.00STANDARDS905-A17
AGMA 908-B89 (reaffirmed November 11, 2020)Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth47.0094.00STANDARDS908-B89
AGMA 909-A06 (reaffirmed April 10, 2018)Specifications for Molded Plastic Gears27.5055.00STANDARDS909-A06
AGMA 910-D12 (reaffirmed September 6, 2017)Formats for Fine-Pitch Gear Specification Data29.5059.00STANDARDS910-D12
ANSI/AGMA 9103-C17 (with Errata) (Reaffirmed August 2022)Flexible Couplings – Keyless Fits (Metric Edition)35.0070.00STANDARDS9103-C17
ANSI/AGMA 9104-A06 (reaffirmed December 19, 2017)Flexible Couplings - Mass Elastic Properties and Other Characteristics ( Metric Edition)33.5067.00STANDARDS9104-A06
AGMA 911-B21Design Guidelines for Aerospace Gear Systems175.00275.00STANDARDS911-B21
ANSI/AGMA 9110-A11 (Reaffirmed January 2022)Flexible Couplings - Potential Unbalance Classification (Metric Edition)36.5073.00STANDARDS9110-A11
ANSI/AGMA 9112-B15 (Reaffirmed December 7, 2020)Bores and Keyways for Flexable Couplings (Metric Series)31.0062.00STANDARDS9112-B15
AGMA 913-A98 (Reaffirmed May 2021)Method for Specifying the Geometry of Spur and Helical Gears31.0062.00STANDARDS913-A98
AGMA 914-B04 (reaffirmed March 15, 2018)Gear Sound Manual - Part I: Fundamentals of Sound as Related to Gears; Part II: Sources, Specifications and Levels of Gear Sound; Part III: Gear Noise Control40.0080.00STANDARDS914-B04
AGMA 915-3-A99Inspection Practices - Part 3: Gear Blanks, Shaft Center Distance and Parallelism17.0034.00STANDARDS915-3-A99
AGMA 916-A19Face Gears with Intersecting Perpendicular Axes95.00190.00STANDARDS916-A19
AGMA 917-B97Design Manual for Parallel Shaft Fine-Pitch Gearing0.0090.00STANDARDS917-B97
AGMA 918-A93 (Reaffirmed November 11, 2020)A Summary of Numerical Examples Demonstrating the Procedures for Calculating Geometry Factors for Spur and Helical Gears36.0072.00STANDARDS918-A93
AGMA 919-1-A14 (reaffirmed March 25, 2019)Condition Monitoring and Diagnostics of Gear Units and Open Gears: Part 1 - Basics27.5055.00STANDARDS919-1-A14
AGMA 920-B15 (Reaffirmed June 2020)Materials for Plastic Gears31.0062.00STANDARDS920-B15
AGMA 922-A96 (Reaffirmed April 2020)Load Classification & Service Factors for Flexible Coupling21.0042.00STANDARDS922-A96
AGMA 923-C22Metallurgical Specifications for Steel and Cast Iron Gearing0.00340.00STANDARDS923-C22
AGMA 925-B22Effect of Tribology and Lubrication on Gear Surface Distress92.50185.00STANDARDS925-B22
AGMA 926-C99 (reaffirmed November 29, 2017)Recommended Practice for Carburized Aerospace Gearing27.0054.00STANDARDS926-C99
AGMA 927-A01 (reaffirmed January 30, 2018)Load Distribution Factors - Analytical Methods for Cylindrical Gears35.5071.00STANDARDS927-A01
AGMA 929-B22Calculation of Bevel Gear Top Land, Slot Widths and Cutter Edge Radii0.00295.00STANDARDS929-B22
AGMA 930-A05Calculated Bending Load Capacity of Powder Metallurgy (P/M) External Spur Gears47.0094.00STANDARDS930-A05
AGMA 932-A05 (reaffirmed February 3, 2011)Rating the Pitting Resistance and Bending Strength of Hypoid Gears.33.5067.00STANDARDS932-A05
AGMA 933-B03Basic Gear Geometry19.5039.00STANDARDS933-B03
AGMA 935-A05 (Reaffirmed April 2020)Recommendations Relative to the Evaluation of Radial Composite Gear Double Flank Testers22.0044.00STANDARDS935-A05
AGMA 937-A12Aerospace Bevel Gears54.50109.00STANDARDS937-A12
AGMA 938-A05 (reaffirmed September 19, 2017)Shot Peening of Gears25.0050.00STANDARDS938-A05
AGMA 939-A07 (reaffirmed January 30, 2018)Austempered Ductile Iron for Gears31.0062.00STANDARDS939-A07
AGMA 940-A09Double Helical Epicyclic Gear Units34.0068.00STANDARDS940-A09
AGMA 942-A12Metallurgical Specifications for Powder Metallurgy, PM, Steel Gearing38.5077.00STANDARDS942-A12
AGMA 943-A22Tolerances for Spur and Helical Racks71.50143.00STANDARDS943-A22
AGMA 944-A19Mechanisms of Powder Metal, PM, Gear Failures65.00130.00STANDARDS944-A19
AGMA 945-1-B20Splines - Design and Application65.00130.00STANDARDS945-1-B20
AGMA 945-2-B20Splines - Design and Application (Inch Edition)65.00130.00STANDARDS945-2-B20
AGMA 946-A21Test Methods for Plastic Gears70.00140.00STANDARDS946-A21
AGMA 955-A22Guidance for Industrial Gear Lubrication0.00170.00STANDARDS955-A22
AGMA 915-2-B20Inspection Practices - Part 2: Double Flank Radial Composite Measurements85.00170.00STANDARDSAGMA 915-2-B20