AGMA Publications

Access the most up-to-date publications applicable to gear manufacturing.  

AGMA members  get a discount on all of our standards documents and other products.  

The results below can be refined by adding search criteria and clicking 'Find'.


  1. All documents purchased here will be delivered electronically.
  2. If you are searching for an older standard and do not get a result, it may have been revised or withdrawn. Please refer to the AGMA Publications Catalog
  3. Permission to request use of AGMA Copyrighted material form.

Complete product listing

Document #Document TitleMember PriceNon Member PriceProduct Category
ANSI/AGMA 1003-H07Tooth Proportions for Fine-Pitch Spur and Helical Gearing155.00310.00STANDARDS1003-H07
ANSI/AGMA 1006-A97Tooth Proportions for Plastic Gears115.00230.00STANDARDS1006-A97
AGMA ISO 10064-1-A21Code of Inspection Practice - Part 1: Measurement of Cylindrical Gear Tooth Flanks235.00315.00STANDARDS10064-1-A21
AGMA ISO 10064-5-A06Code of Inspection Practice - Part 5: Recommendations Relative to Evaluation of Gear Measuring Instruments81.50163.00STANDARDS10064-5-A06
AGMA ISO 10064-6-A10Code of Inspection Practice - Part 6: Bevel Gear Measurement Methods67.00134.00STANDARDS10064-6-A10
ANSI/AGMA 1010-F14Appearance of Gear Teeth - Terminology of Wear and Failure195.00390.00STANDARDS1010-F14
ANSI/AGMA 1012-G05Gear Nomenclature, Definitions of Terms with Symbols135.00270.00STANDARDS1012-G05
ANSI/AGMA 1102-C19Tolerance Specification for Gear Hobs125.00250.00STANDARDS1102-C19
ANSI/AGMA 1103-H07Tooth Proportions for Fine-Pitch Spur and Helical Gearing (Metric Edition)155.00310.00STANDARDS1103-H07
ANSI/AGMA 1104-A09Tolerance Specification for Shaper Cutters115.00230.00STANDARDS1104-A09
ANSI/AGMA 1106-A97Tolerance Specification for Shaper Cutters115.00230.00STANDARDS1106-A97
ANSI/AGMA 1107-A19Tolerance Specification for Form Milling Cutters135.00270.00STANDARDS1107-A19
ANSI/AGMA ISO 1328-1-B14Cylindrical Gears – ISO System of Flank Tolerance Classification Part 1: Definitions and Allowable Values of Deviations Relevant to Flanks of Gear Teeth77.50155.00STANDARDS1328-1-B14
ANSI/AGMA ISO 1328-2-A21Cylindrical Gears — ISO System of Flank Tolerance Classification — Part 2: Definitions and Allowable Values of Double Flank Radial Composite Deviations70.00140.00STANDARDS1328-2-A21
ANSI/AGMA ISO 14104-A17Gears - Surface Temper Etch Inspection After Grinding, Chemical Method55.00110.00STANDARDS14104-A17
AGMA ISO 14179-1Gear Reducers - Thermal Capacity Based on ISO/TR 14179-136.5073.00STANDARDS14179-1
ANSI/AGMA ISO 17485-A08Bevel Gears - ISO System of Accuracy61.50123.00STANDARDS17485-A08
ANSI/AGMA ISO 17485-A08 (Supplemental Tables)Bevel Gears - ISO System of Accuracy - Tolerance Tables18.0036.00STANDARDS17485-A08 SUPP
ANSI/AGMA ISO 18653-A06Gears - Evaluation of Instruments for the Measurement of Individual Gears41.5083.00STANDARDS18653-A06
AGMA ISO 18792-A19Lubrication of Industrial Gear Drives185.00370.00STANDARDS18792-A19
ANSI/AGMA 2000-A88Gear Classification and Inspection Handbook - Tolerances and Measuring Methods for Unassembled Spur and Helical Gears (Including Metric Equivalents)165.00330.00STANDARDS2000-A88
ANSI/AGMA 2001-D04Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth195.00390.00STANDARDS2001-D04
ANSI/AGMA 2002-D19Tooth Thickness and Backlash Measurement of Cylindrical Involute Gearing190.00380.00STANDARDS2002-D19
ANSI/AGMA 2003-D19Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel and Spiral Bevel Gear Teeth155.00310.00STANDARDS2003-D19
ANSI/AGMA 2004-C08Gear Materials, Heat Treatment and Processing Manual115.00230.00STANDARDS2004-C08
ANSI/AGMA 2008-D11Assembling Bevel Gears115.00230.00STANDARDS2008-D11
ANSI/AGMA 2011-B14Cylindrical Wormgearing Tolerance and Inspection Methods115.00230.00STANDARDS2011-B14
ANSI/AGMA 2101-D04Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth (Metric Edition)195.00390.00STANDARDS2101-D04
ANSI/AGMA 2111-A98Cylindrical Wormgearing Tolerance and Inspection Methods (Metric Edition)115.00230.00STANDARDS2111-A98
ANSI/AGMA 2116-A05Evaluation of Double Flank Testers for Radial Composite Measurement of Gears115.00230.00STANDARDS2116-A05
AGMA ISO 22849-A12Design Recommendations for Bevel Gears82.50165.00STANDARDS22849-A-12
ANSI/AGMA ISO 23509-B17Bevel and Hypoid Gear Geometry120.00240.00STANDARDS23509-B17
ANSI/AGMA 6000-C20Specification for Measurement of Linear Vibration on Gear Units135.00270.00STANDARDS6000-C20
ANSI/AGMA 6001-F19Design and Selection of Components for Enclosed Gear Drives125.00250.00STANDARDS6001-F19
ANSI/AGMA 6002-D20Design Guide for Vehicle Spur and Helical Gears155.00310.00STANDARDS6002-D20
ANSI/AGMA 6006-B20Standard for Design and Specifications of Gearboxes for Wind Turbines195.00390.00STANDARDS6006-B20
ANSI/AGMA 6008-A98Specifications for Powder Metallurgy Gears135.00270.00STANDARDS6008-A98
ANSI/AGMA 6011-J14Specification for High Speed Helical Gear Units135.00270.00STANDARDS6011-J14
ANSI/AGMA 6013-B16 (Errata included)Standard for Industrial Enclosed Gear Drives155.00310.00STANDARDS6013-B16
ANSI/AGMA 6014-B15Gear Power Rating for Cylindrical Shell and Trunnion Supported Equipment155.00310.00STANDARDS6014-B15
ANSI/AGMA 6015-A13Power Rating of Single and Double Helical Gearing for Rolling Mill Service155.00310.00STANDARDS6015-A13
ANSI/AGMA 6022-D19 (Errata included)Standard for Design Manual for Cylindrical Wormgearing135.00270.00STANDARDS6022-D19
ANSI/AGMA 6025-E19Sound for Enclosed Helical, Herringbone and Spiral Bevel Gear Drives125.00250.00STANDARDS6025-E19
ANSI/AGMA 6032-B13Standard for Marine Gear Units: Rating and Application for Spur and Helical Gear Teeth155.00310.00STANDARDS6032-B13
ANSI/AGMA 6033-C08Materials for Marine Propulsion Gearing135.00270.00STANDARDS6033-C08
ANSI/AGMA 6034-C21Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors155.00310.00STANDARDS6034-C21
ANSI/AGMA 6035-A02Design, Rating and Application of Industrial Globoidal Wormgearing155.00310.00STANDARDS6035-A02
ANSI/AGMA 6101-F19Design and Selection of Components for Enclosed Gear Drives (Metric Edition)125.00250.00STANDARDS6101-F19
ANSI/AGMA 6102-D20Design Guide for Vehicle Spur and Helical Gears (Metric Edition)155.00310.00STANDARDS6102-D20
ANSI/AGMA 6113-B16 (Errata included)Standard for Industrial Enclosed Gear Drives (Metric Edition)155.00310.00STANDARDS6113-B16
ANSI/AGMA 6114-B15Gear Power Rating for Cylindrical Shell and Trunnion Supported Equipment (Metric Edition)155.00310.00STANDARDS6114-B15
ANSI/AGMA 6115-A13Power Rating of Single and Double Helical Gearing for Rolling Mill Service (Metric Edition)115.00230.00STANDARDS6115-A13
ANSI/AGMA 6123-C16 (Errata included)Design Manual for Enclosed Epicyclic Gear Drives165.00330.00STANDARDS6123-C16
ANSI/AGMA 6132-B13Standard for Marine Gear Units: Rating and Application for Spur and Helical Gear Teeth (Metric Edition)155.00310.00STANDARDS6132-B13
ANSI/AGMA 6133-C08Materials for Propulsion Gearing (Metric Edition)135.00270.00STANDARDS6133-C08
ANSI/AGMA 6134-C21Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors (Metric Edition)155.00310.00STANDARDS6134-C21
ANSI/AGMA 6135-A02Design, Rating and Application of Industrial Globoidal Wormgearing (Metric Edition)155.00310.00STANDARDS6135-A02
ANSI/AGMA 9000-D11Flexible Couplings - Potential Unbalance Classification135.00270.00STANDARDS9000-D11
ANSI/AGMA 9001-C18Flexible Couplings - Lubrication115.00230.00STANDARDS9001-C18
ANSI/AGMA 9002-C14Bores and Keyways for Flexible Couplings (Inch Series)115.00230.00STANDARDS9002-C14
ANSI/AGMA 9003-C17 (Errata included)Flexible Couplings – Keyless Fits115.00230.00STANDARDS9003-C17
ANSI/AGMA 9004-B08Flexible Couplings - Mass Elastic Properties and Other Characteristics115.00230.00STANDARDS9004-B08
ANSI/AGMA 9005-F16Industrial Gear Lubrication115.00230.00STANDARDS9005-F16
ANSI/AGMA 9006-A16Flexible Couplings - Basis for Rating115.00230.00STANDARDS9006-A16
ANSI/AGMA 9008-B00Flexible Couplings - Gear Type - Flange Dimensions, Inch Series115.00230.00STANDARDS9008-B00
ANSI/AGMA 9009-E20Flexible Couplings - Nomenclature for Flexible Couplings115.00230.00STANDARDS9009-E-20
AGMA 901-A92A Rational Procedure for the Preliminary Design of Minimum Volume Gears65.00130.00STANDARDS901-A92
AGMA 904-C96Metric Usage55.00110.00STANDARDS904-C96
AGMA 905-A17Inspection of Molded Plastic Gears55.00110.00STANDARDS905-A17
AGMA 908-B89Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth65.00130.00STANDARDS908-B89
AGMA 909-A06Specifications for Molded Plastic Gears55.00110.00STANDARDS909-A06
AGMA 910-D12Formats for Fine-Pitch Gear Specification Data65.00130.00STANDARDS910-D12
ANSI/AGMA 9103-C17 (Errata included)Flexible Couplings – Keyless Fits (Metric Edition)115.00230.00STANDARDS9103-C17
ANSI/AGMA 9104-A06Flexible Couplings - Mass Elastic Properties and Other Characteristics ( Metric Edition)115.00230.00STANDARDS9104-A06
AGMA 911-B21Design Guidelines for Aerospace Gear Systems175.00350.00STANDARDS911-B21
ANSI/AGMA 9110-A11Flexible Couplings - Potential Unbalance Classification (Metric Edition)115.00230.00STANDARDS9110-A11
ANSI/AGMA 9112-B15Bores and Keyways for Flexible Couplings (Metric Series)115.00230.00STANDARDS9112-B15
AGMA 913-A98Method for Specifying the Geometry of Spur and Helical Gears65.00130.00STANDARDS913-A98
AGMA 914-B04Gear Sound Manual - Part I: Fundamentals of Sound as Related to Gears; Part II: Sources, Specifications and Levels of Gear Sound; Part III: Gear Noise Control65.00130.00STANDARDS914-B04
AGMA 915-3-A99Inspection Practices - Part 3: Gear Blanks, Shaft Center Distance and Parallelism55.00110.00STANDARDS915-3-A99
AGMA 916-A19Face Gears with Intersecting Perpendicular Axes105.00210.00STANDARDS916-A19
AGMA 917-B97Design Manual for Parallel Shaft Fine-Pitch Gearing65.00130.00STANDARDS917-B97
AGMA 918-A93A Summary of Numerical Examples Demonstrating the Procedures for Calculating Geometry Factors for Spur and Helical Gears65.00130.00STANDARDS918-A93
AGMA 919-1-A14Condition Monitoring and Diagnostics of Gear Units and Open Gears: Part 1 - Basics65.00130.00STANDARDS919-1-A14
AGMA 920-B15Materials for Plastic Gears65.00130.00STANDARDS920-B15
AGMA 922-A96Load Classification & Service Factors for Flexible Coupling75.00150.00STANDARDS922-A96
AGMA 923-C22Metallurgical Specifications for Steel and Cast Iron Gearing175.00350.00STANDARDS923-C22
AGMA 925-B22Effect of Tribology and Lubrication on Gear Surface Distress115.00230.00STANDARDS925-B22
AGMA 926-C99Recommended Practice for Carburized Aerospace Gearing55.00110.00STANDARDS926-C99
AGMA 927-A01Load Distribution Factors - Analytical Methods for Cylindrical Gears65.00130.00STANDARDS927-A01
AGMA 929-B22Calculation of Bevel Gear Top Land, Slot Widths and Cutter Edge Radii155.00310.00STANDARDS929-B22
AGMA 930-A05Calculated Bending Load Capacity of Powder Metallurgy (P/M) External Spur Gears65.00130.00STANDARDS930-A05
AGMA 932-A05Rating the Pitting Resistance and Bending Strength of Hypoid Gears65.00130.00STANDARDS932-A05
AGMA 933-B03Basic Gear Geometry55.00110.00STANDARDS933-B03
AGMA 935-A05Recommendations Relative to the Evaluation of Radial Composite Gear Double Flank Testers55.00110.00STANDARDS935-A05
AGMA 937-A12Aerospace Bevel Gears95.00190.00STANDARDS937-A12
AGMA 938-A05Shot Peening of Gears55.00110.00STANDARDS938-A05
AGMA 939-A07Austempered Ductile Iron for Gears75.00150.00STANDARDS939-A07
AGMA 940-A09Double Helical Epicyclic Gear Units65.00130.00STANDARDS940-A09
AGMA 942-A12Metallurgical Specifications for Powder Metallurgy, PM, Steel Gearing65.00130.00STANDARDS942-A12
AGMA 943-A22Tolerances for Spur and Helical Racks85.00170.00STANDARDS943-A22
AGMA 944-A19Mechanisms of Powder Metal, PM, Gear Failures75.00150.00STANDARDS944-A19
AGMA 945-1-B20Splines - Design and Application75.00150.00STANDARDS945-1-B20
AGMA 945-2-B20Splines - Design and Application (Inch Edition)75.00150.00STANDARDS945-2-B20
AGMA 946-A21Test Methods for Plastic Gears85.00170.00STANDARDS946-A21
AGMA 955-A22Guidance for Industrial Gear Lubrication105.00210.00STANDARDS955-A22
AGMA 915-2-B20Inspection Practices - Part 2: Double Flank Radial Composite Measurements105.00210.00STANDARDSAGMA 915-2-B20